Webdesign Home
Copperjacket.com
Computer Buying Guide, Computer Training, FAQ
 

Sega Dreamcast Internet Setup

 

1. Set up your Dreamcast according to the Owner's Manual.
    Make sure your Dreamcast is plugged directly into a phone jack (do not use any type of splitter).

2. Insert the Dreamcast Web Browser. You can use any version of the Dreamcast Web Browser to change ISP information. If you do not have a Dreamcast Web Browser, please contact Sega for a replacement.

3. Press the POWER button to turn on your Dreamcast. You should see the Dreamcast Intro and Sega License screens, followed by the Planet Web splash screen. If not enough free memory blocks are available in your VMU, or if you don't have a VMU installed, you'll see the following screen:

  Info
  There are not enough free memory blocks. 3 empty blocks are required for saving.
  If the Web Browser is started, saving will not be possible.

Select OK to advance past this screen.

4. Press the START button on your controller.

5. Choose Options from the menu cluster.

 

dcast1.gif (56573 bytes)

6. Under Required Settings, select INTERNET CONNECTION.

 

dcast2.gif (52281 bytes)

7. On the Basic Info screen, fill out the following info:
Your Real Name: (this is not required)
User Login: (either your ISP account username or full e-mail address - username@isp.com)
Password: (your ISP account password)
Dial up Number: (your ISP will provide you with the access number closest to you)
Backup Number: (optional, but recommended. Ask your ISP for this.)
DNS 1: 66.180.11.36
DNS 2:
66.180.13.1

 

dcast3.gif (62245 bytes)

8. Next, fill out the Dial Options screen:
Area code you are dialing from: (required for users who need to dial an area code with their dial up number)
Long distance call prefix: (not required - usually "1" if needed)
Call waiting prefix: (not required - usually "*70" if needed)
Outside dialing prefix: (not required - usually "9" if needed)
Modem init AT&F (don't change this - use default value: ATR&F0)
Dial: Tone or Pulse (default "Tone")
Dial area code: On or Off (default "Off")
Blind Dial: On or Off (default "Off." Select "On" only if you have voicemail on your phone that causes a beep when you pick it up.)

 

dcast4.gif (51472 bytes)

9. Finally, fill out the Proxy Settings screen (if your ISP requires further details)
Use Proxy: Y or N
Proxy Server Name: (default: blank)
Proxy Port: (default: blank)

 

dcast5.gif (54977 bytes)

10. Once all your changes have been completed, select OK.
On the Required and Optional Settings screen, select SAVE to save all changes to the Dreamcast system memory.
DO NOT RESET OR POWER OFF YOUR DREAMCAST AS SETTINGS ARE BEING SAVED.

11. Try to get online with your Dreamcast. If you succeed, your changes are complete

 
  Copyright copperjacket.com 2000-2016, all rights reserved
Design Evolution | Sitemap | Disclaimer