Webdesign Home
Copperjacket.com
Website design, development and promotion services.


1936 Ford Truck, fenders, running boards and other pieces for sale.

Archimedes Dee
UPDATE 11/18/2017 The inner fenders and fender braces are GONE! They were just carried down my drive way in exchange for green backs and are down interstate 80 somewhere by now.
UPDATE 9/22/2017 READ FIRST: Please don't call and ask if something shown here as available is still available. If it is here it is. Thanks!
UPDATE 8/2/2017 The fenders and inner fenders have NOT been sold. They are still available.
UPDATE 6/16/2017 The fenders and inner fender might have been sold.
UPDATE 2/10/2017 Come to think about it fellas, I also have the original temperature gauge I removed out of this truack as well. With what appears to be an intact domed glass lens. I will get some pictures taken of that and get them up here soon as well. Just in case anybody has interest in that.

These parts are from a truck of the same type and year as the one shown above, these parts are NOT from the THE truck shown. They are for sale because the land which was owned by my immediate relatives was sold before I could get the pickup cab and frame off the property.

For sale: Parts to a 1936 Ford Truck, fenders, running boards and other pieces.


2 original steel fenders
2 original steel inner fenders
2 original steel running boards
1 original steel cab floorboard
2 headlight buckets
All inner fender braces

Fenders:

Black Fender: 19 lbs, Roughly 59" long by 19" high at the crown. The front part of the fender is about 24" wide, where the fender would mount to the running board is is about 13" wide. The gray fender is 23lbs and includes one of the inner fender braces in that weight. These fenders are from the same vehicle, they are only different colors from when I was working towards making something out of them.

Inner Fenders: GONE

The inner fender panels measure about 32 1/2" x 10 1/2" and weight right around 3lbs each. In thickness while they are sheetmetal they are not straight and flat so in consideration of shipping there should be some thickness considered for both of them packed together in a box.

New Pictures 12/17/2016
Both: 1, 2, 3, 4, 5
Panel 1 Side 1: 1, 2, 3, 4
Panel 1 Side 2: 1, 2, 3, 4
Panel 2 Side 1: 1, 2, 3, 4
Panel 2 Side 2: 1, 2, 3, 4

 

Fender Brackets: GONE

The fender brackets both weigh in at around 5 pounds each and measure 27 inches (at their longest) by 10" by 3" at their thickness. Additional higher res photos can be found here in a zip file.

Running Boards:

One running board weighs 15.4 lbs. and measures roughly 53 1/2" long, by 12 1/2" inches wide by 3 1/2" tall.

 

Parts are located in Grand Island Nebraska, please contact Darin at 308-384-1036 to arrange a time to view in person or to make an offer. Other contact methods can be found below.

If you want to see the truck these parts were removed from so as to verify for yourself it is indeed the correct make/model check out these links. NOTE: The parts shown here in the pasture land, the frame and cab, are unavailable as they were left on the land when the land was sold.

Name *
 
City / State
 
Email Address *
 
Retype Email *
 
Fields marked with * are required

Darin Hudson
email@copperjacket.com

308-384-1036

Grand Island, Nebraska




 
  Copyright copperjacket.com 2000-2016, all rights reserved
Design Evolution | Sitemap | Disclaimer